超聲波清洗機電路具有自動掃頻功能，出色脈沖電路，頻率更合理、運行更穩定、脫氣效率更高，噪音更低。

　　The ultrasonic cleaning machine circuit has an automatic frequency scanning function, an efficient pulse circuit, more accurate frequency, more stable operation, higher degassing efficiency, and lower noise.

　　超聲波清洗機預處理

　　Ultrasonic cleaning machine pretreatment

　　清洗之前宜用竹刀先將零部件表面的污垢（如防塵罩外表面會有很多塵土、氣缸體類的零件在其外殼曲線變化處會積留很多厚且易除的油泥）簡單清潔一下，以便延長清洗液使用壽命。

　　Before cleaning, it is advisable to use a bamboo knife to clean the dirt on the surface of the components (such as a lot of dust on the outer surface of the dust cover, and a lot of thick and easily removable oil sludge will accumulate at the curve changes of the cylinder body), in order to extend the service life of the cleaning solution.

　　超聲波能夠進行精密清洗，但其對泥類的污物處理能力較弱，故預處理中，應盡量將黃泥或稀泥類的污物去除。

　　Ultrasound can perform precision cleaning, but its ability to treat mud like dirt is weak. Therefore, in pre-treatment, yellow mud or thin mud like dirt should be removed as much as possible.

　　工作原理

　　working principle

　　通過換能器，將功率超聲頻源的聲能轉換成機械振動，通過清洗槽壁將超聲波輻射到槽子中的清洗液。由于受到超聲波的輻射，槽內液體中的微氣泡能夠在聲波的作用下快速變大破裂，破裂時產生的高強度剪切力作用于各類樣品上，從而達到清洗、提取、乳化、加速溶解、粉碎、分散等作用。

　　By using a transducer, the sound energy of the power ultrasonic frequency source is converted into mechanical vibration, and the ultrasonic waves are radiated into the cleaning solution in the tank through the cleaning tank wall. Due to the radiation of ultrasound, microbubbles in the liquid in the tank can quickly grow and rupture under the action of sound waves. The high-strength shear force generated during rupture acts on various samples, achieving cleaning, extraction, emulsification, accelerated dissolution, crushing, dispersion, and other functions.

　　超聲波清洗機功率如何選擇？

　　How to choose the power of an ultrasonic cleaning machine?

　　超聲清洗效果不一定與（功率×清洗時間）成正比，有時用小功率，花費很長時間也沒有清除污垢。而如果功率達到一定數值，有時很快便將污垢去除。若選擇功率太大，空化強度將大大增加，清洗效果是提高了，但這時使較精密的零件也產生蝕點，得不償失，而且清洗缸底部振動板處空化嚴重，水點腐蝕也提升，在采用三氯乙烯等有機溶劑時，基本上沒有問題，但采用水或水溶性清洗液時，易于受到水點腐蝕，如果振動板表面已受到傷痕，強功率下水底產生空化腐蝕更嚴重，因此要按實際使用情況選擇超聲功率。

　　The effect of ultrasonic cleaning may not be directly proportional to (power x cleaning time), and sometimes using low power may take a long time without removing dirt. If the power reaches a certain value, sometimes the dirt is quickly removed. If the selected power is too high, the cavitation intensity will greatly increase, and the cleaning effect will be improved. However, at this time, more precise parts will also produce corrosion points, which is not worth the loss. Moreover, the vibration plate at the bottom of the cleaning cylinder will have severe cavitation and increased water point corrosion. When using organic solvents such as trichloroethylene, there is basically no problem. However, when using water or water-soluble cleaning liquids, they are prone to water point corrosion. If the surface of the vibration plate has been damaged, the cavitation corrosion at the bottom of the water will be more severe under high power. Therefore, ultrasonic power should be selected according to actual usage conditions.

　　本文由超聲波清洗機 友情奉獻.更多有關的知識請點擊   http://m.qjdblr.com  真誠的態度.為您提供為多維度的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is written by Friendly dedication to ultrasonic cleaning machines. For more related knowledge, please click http://m.qjdblr.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned